Back To Top
Fasani Through Conduit Gate Valve
Through Conduit Gate Valve
Through conduit, slab type bolted bonnet valves are an excellent choice for off-shore and pipeline applications
Fasani Through Conduit Gate Valve

Specs

Certifications
PED, NACE
End Connection
Flanged
Application
Hydrocrackers, Produced Fluids Management, Refining, Pumps, Valves & Manifolds
Body Design
Top Entry, Short Pattern
Material
Carbon Steel
Operating Temperature
Less Than 200 C
Pressure Class
ASME
Process Connection Type
Flanged, 900RF, 600RF, 300RF, 2500RF, 150RF, 1500RF
Seat/Seal Type
Soft Seal
Standards
API 6D
Media
Other
Stem
Adjustable packing

Features

  • Designed to meet API 6D specification. Full bore design, suitable for pigging and hot tapping and to minimize turbulence and pressure drop.
  • Designed to allow in-line valve maintenance.
  • Body cavity isolated from flow stream. Designed acc. ASME Boiler and Pressure Vessel code Section VIII div. 1, and ASME B16.34.
  • Flanges integral with valve body. Manufactured in accordance with ASME B16.5 and B16.47 'A' type. Flange face finishing available in raised or ring joint type.
  • Butt weld end is acc. to ASME B16.25. Design of weld end to prevent any soft seal damage during field welding.
  • Stem is completely covered during valve operation.
  • Available as integral casting or as a combination of cast center section and fabricated lower section and bonnet (depending on size).
  • Reinforcing ribs, where present, do not extend beyond the flange faces.
  • Seats are floating, spring actuated and seal in the recess is achieved by O-rings.
  • Double block-and-bleed option to facilitate complete flushing, draining and venting of the valve body cavity.
  • Prevention of body cavity over-pressure achieved by self-relieving seat ring/assemblies into the upstream line.
  • Valves are supplied with vent and drain to release trapped body pressure and liquids.

Education

Interested in attending a training class?

Visit our Education Course Listing.