Back To Top
Nelson™ Heat Trace PLT-LP, PLT-LPM, PLT-LPS and PLT-L Connection Kits
Nelson™ Heat Trace PLT Series connection kits are approved for use in ordinary and Division 2 hazardous areas when used with Nelson™ Heat Trace CLT, LT, HLT, XLT and NC Series field-fabricated heating cables.
The -LP is suitable for connecting up to two heating cables to customer supplied power wiring or as an in-line splice configuration utilizing a customer supplied junction box. The -LPM differs from the -LP in that it also contains molded silicone cable terminations and the standard terminal block. The -LPS differs as it also contains shrink tube cable terminations and the standard terminal block. The -L connection kits are designed as end-of-circuit indicating light assemblies utilizing low temperature LEDs.
Nelson™ Heat Trace PLT-LP, PLT-LPM, PLT-LPS and PLT-L Connection Kits

Specs

Certifications and Compliances
UL Listed, CSA Certified, FM Approved: Hazardous (Classified) Locations
Underwriter's Laboratory
Class I, Division 2, Groups A, B, C, D; Class II, Division 2, Groups F, G
Canadian Standards Association
Class I, Division 2, Groups B, C, D; Class II, Division 2, Groups E, F, G
Factory Mutual
Class I, Division 2, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class I, Zone 2, Group IIC
Ingress Protection
NEMA 4X (-L only)
Light Assembly
Low Temperature LED (-L only)
Grommet Selection
-B (braided cable), -J (overjacketed cable), -U (special constructions or multi-cable entry)

Features

  • PLT-LP connection kit contains: 1 universal base, box adapter, sealing gasket and locknut; 1 sealing grommet (specify cable construction)
  • PLT-LPM connection kit contains: 1 universal base, box adapter, sealing gasket and locknut; 1 sealing grommet (specify cable construction); 1 power termination and cable end seal with adhesive sealant; 1 3-point floating terminal block; 1 ground connecti
  • PLT-LPS connection kit contains: 1 universal base, box adapter, sealing gasket and locknut; 1 sealing grommet (specify cable construction); 1 power termination and cable end seal; 1 ground connection splice
  • PLT-L connection kit is selectable for 120/208/240/277 Vac operation. Kit contains: 1 universal base, box adapter, sealing gasket and locknut; 1 junction box with sealing gasket and cover; 1 pilot light assembly (specify voltage); 1 sealing grommet (spec

Education

Interesting in attending a training class?

Visit Course Listing!